High definition Carbide Insert Knives - Mitsubishi Corrugated Carbide Slitting Knives – Xinhua
High definition Carbide Insert Knives - Mitsubishi Corrugated Carbide Slitting Knives – Xinhua Detail:
Application areas
The cemented carbide corrugated paper circular knives made by tungsten carbide and cobalt powder metallurgy have high hardness and wear resistance, and at the same time have good heat resistance and corrosion resistance, so that the knives are widely used in the cutting of corrugated cardboard.
By adjusting the ratio of tungsten carbide and cobalt and the particle size of tungsten carbide powder, we obtain cemented carbides with different properties to meet the needs of different customers.
Our advantage
Our company has more than 20 years of production history of tungsten carbide slitting knives, specializing in the production of tungsten carbide corrugated paper round knives and various carbide slitting knives.
More than half of the products are exported to Europe, the United States and other developed countries and regions. Product performance fully meets the strict requirements of various high-speed slitting equipments. Product quality is in a leading position in the domestic and foreign industrial tool market segments.
Our company’s goal is to become the most professional, best quality, and largest supplier of tungsten steel slitting knives.
Recommended Materials
Grade | Grain Size | Density | Hardness | TRS(N/mm²) | Suitable for Cutting |
g/cm³ | HRA | ||||
ZT20U | Sub-fine | 14.35-14.5 | 91.4-91.8 | 3200 | Corrugated board,Chemical fiber,Plastics,Leather |
ZT26U | Sub-fine | 14-14.1 | 90.4-90.8 | 3500 | Corrugated board,Battery pole pieces |
ZT30U | Sub-fine | 13.85-14 | 89.7-90.2 | 3200 | Paperboard |
Common Specifications
Items No | OD (mm) | ID (mm) | T (mm) | Holes(mm) | Available for Machine |
1 | 230 | 110 | 1.1 | φ9*6holes | FOSBER |
2 | 230 | 135 | 1.1 | 4 key slots | FOSBER |
3 | 220 | 115 | 1 | φ9*3holes | AGNATI |
4 | 240 | 32 | 1.2 | φ8.5*2holes | BHS |
5 | 240 | 115 | 1 | φ9*3holes | AGNATI |
6 | 250 | 150 | 0.8 | PETERS | |
7 | 257 | 135 | 1.1 | FOSBER | |
8 | 260 | 112 | 1.5 | φ11*6holes | ORANDA |
9 | 260 | 140 | 1.5 | ISOWA | |
10 | 260 | 168.3 | 1.2 | φ10.5*8holes | MARQUIP |
11 | 270 | 168.3 | 1.5 | φ10.5*8holes | HSEIH |
12 | 270 | 140 | 1.3 | φ11*6holes | VATANMAKEINA |
13 | 270 | 170 | 1.3 | φ10.5*8holes | |
14 | 280 | 160 | 1 | φ7.5*6holes | MITSUBISHI |
15 | 280 | 202 | 1.4 | φ8*6holes | MITSUBISHI |
16 | 291 | 203 | 1.1 | φ8.5*6holes | FOSBER |
17 | 300 | 112 | 1.2 | φ11*6holes | TCY |
Knives for corrugated board cutting For Chinese Machines
Items No | OD (mm) | ID (mm) | T (mm) | Holes |
1 | 200 | 122 | 1.2 | |
2 | 210 | 110 | 1.5 | |
3 | 210 | 122 | 1.3 | |
4 | 230 | 110 | 1.3 | |
5 | 230 | 130 | 1.5 | |
6 | 250 | 105 | 1.5 | φ11mm*6holes |
7 | 250 | 140 | 1.5 | |
8 | 260 | 112 | 1.5 | φ11mm*6holes |
9 | 260 | 114 | 1.6 | φ11mm*8holes |
10 | 260 | 140 | 1.5 | |
11 | 260 | 158 | 1.5 | φ11mm*8holes |
12 | 260 | 112 | 1.4 | φ11mm*6holes |
13 | 260 | 158 | 1.5 | φ9.2mm*3holes |
14 | 260 | 168.3 | 1.6 | φ10.5mm*8holes |
15 | 260 | 170 | 1.5 | φ9mm*8holes |
16 | 265 | 112 | 1.4 | φ11mm*6holes |
17 | 265 | 170 | 1.5 | φ10.5mm*8holes |
18 | 270 | 168 | 1.5 | φ10.5mm*8holes |
19 | 270 | 168.3 | 1.5 | φ10.5mm*8holes |
20 | 270 | 170 | 1.6 | φ10.5mm*8holes |
21 | 280 | 168 | 1.6 | φ12mm*8holes |
22 | 290 | 112 | 1.5 | φ12mm*6holes |
23 | 290 | 168 | 1.5/1.6 | φ12mm*6holes |
24 | 300 | 112 | 1.5 | φ11mm*6holes |
FAQ for technical problems
Analysis of the common problems of corrugated board slitting knives
(Not: all the problems we discussed for the qualified knives )
Q1 Why The Short working life time of currugated board slitting knives?
A :Is the grain size of the grinding wheel proper?
Too coarse grain size of grinding wheel make a short working life time of knives
Q2 Why the edges of corrugated boards cut by knives with burr and dent?
A:Please check the cutting edge of your knives ,is the cutting edge keen enough? Or if the corrrugated board is too wet ?
Q3 Knives broken
A: Improper assembly (e.g deformed flange plate; improper screwing) will cause the quick break of blades , any improper touch of the blades is strictly prohibited during the working ,
Unstable swing grinding wheels break the knives,please check the bearing of grinding wheels .
Improper touch or strike with other hard things.
Accident collision of knives
Q4 Chips on the cutting edge after the grinding.
A: Unstable swing grinding wheels may cause this problem , even break the knives , The strike of hard things may cause the chips on the cutting edge also .
Q5 Why the edge of corrugated board is not straight ?
A:Unmatched strength of knives for the corrugated board with high density .
FAQ about pre-sales and after-sales
Q:Can I get free testing samples?
A:Yes, if you have a clear demand, we can provide free samples for testing.
Q:How about the leading time ?
A:We have regular specifications in stock, and can be shipped within three days after confirming the contract.
Q:Can you also supply steel handles?
Yes, we have handle suppliers that have cooperated for many years, and can provide you stell scraper handles with high-quality, low-price .
Q:Can your factory provide OEM production?
A:Yes, if your purchase quantity meets the requirements, we can design the packaging for you according to your requirements
Q:Do you guarantee the quality?
Yes, we have quality-guaranteed tracking services for the products that have been sold. If you have any questions, please feel free to contact our sales staff. You will get satisfactory after-sales service within 24 hours.
Product detail pictures:
Related Product Guide:
From the past few years, our firm absorbed and digested sophisticated technologies equally at home and abroad. Meanwhile, our organization staffs a group of experts devoted into the growth of High definition Carbide Insert Knives - Mitsubishi Corrugated Carbide Slitting Knives – Xinhua , The product will supply to all over the world, such as: Albania, New Zealand, Madagascar, Qualified R&D engineer will be there for your consultation service and we will try our best to meet your requirements. So please feel free to contact us for inquiries. You'll be able to send us emails or call us for small business. Also you are able to come to our business by yourself to get further knowing of us. And we will surely give you the best quotation and after-sale service. We're ready to build stable and friendly relations with our merchants. To achieve mutual success, we will make our best efforts to build a solid co-operation and transparent communication work with our companions. Above all, we are here to welcome your inquiries for any of our goods and service.
By Helen from Belgium - 2017.05.31 13:26
The accounts manager made a detailed introduction about the product, so that we have a comprehensive understanding of the product, and ultimately we decided to cooperate.
By Erica from Zambia - 2017.04.18 16:45