Waterjet, that is, water as a knife, the original name of the high-pressure water jet cutting technology, this technology first originated in the United States. Used in the aerospace military industry. With its cold cutting will not change the physical and chemical properties of the material and favored. After the continuous improvement of technology, in the high-pressure water mixed with garnet sand, emery and other abrasives to assist in cutting, greatly improving the waterjet cutting speed and cutting thickness. Waterjet has been widely used in ceramics, stone, glass, metal, composite materials and many other industries. In China, the maximum pressure of the waterjet has been done to 420MPa. some technologically advanced companies have perfected the 3-axis, 4-axis waterjet, 5-axis waterjet also tends to mature.
Product Characteristics：
Any material can be any curve of the one-time cutting process (in addition to water cutting other cutting methods will be subject to the limitations of the material species); cutting the heat generated by the high-speed flow of water jets will be immediately taken away, and does not produce harmful substances, the material does not have a thermal effect (cold cutting), cutting does not require or easy to secondary processing, safe, environmentally friendly, faster, more efficient, and can be realized in any curve of the Cutting processing, convenient and flexible, wide range of uses. Water cutting is a mature cutting process with good applicability.
Product Classification：
Gaza situation: water cutting is divided into sand-free cutting and Gaza cutting.
To equipment: divided into large water cutting and small water cutting.
By pressure: divided into high-pressure type and low-pressure type, generally 100MPa as the limit. 100MPa above the high-pressure type, 100MPa below the low-pressure type. Above 200MPa is the ultra-high-pressure type.
Technical principle: divided into pre-mixed and post-mixed.
Mechanical structure: cantilever type and gantry type.
Product Information：
Carbide high pressure water jet cutting nozzle, also called carbide waterjet abrasive pipe, abrasive nozzle, water nozzle, waterjet. Waterjet abrasive tube, mainly used for metal cutting, ceramic cutting, stone cutting, glass cutting and other materials cutting.
Primary material, can be supplied with tantalized titanium coating to increase wear resistance.
Specification diameters are Φ6.35, Φ7.14, Φ7.6, Φ9.45. inner diameters are 0.76~1.2mm.
Made of special material with long service life, hardness up to 94.5, good wear resistance.
Sizes can be produced on request.
Applications:
1.Typical applications in the field of metal cutting
(1) Decoration, decoration in the stainless steel and other metal cutting processing
(2) Manufacturing of outer shells of machines and equipment (e.g. machine tools, food machinery, medical machinery, electrical control cabinets, etc.)
(3) Metal parts cutting (such as semi-finishing of stainless steel flanges, structural parts of steel plates, non-ferrous metals, special metal materials, etc.)
2、Typical applications in the field of glass cutting
(1) Glass cutting for home appliances (gas cooker countertops, hoods, sterilizer cabinets, etc., televisions)
(2) Lamps and lanterns
(3) Bathroom products (shower room, etc.)
(4) Building decoration, craft glass
(5) Automobile glass, etc.
3、Ceramics, stone and other building materials processing field applications
4、Composite materials, bulletproof materials and other special materials, a molding cutting processing
5、Fresh water cutting of soft materials
Post time: Sep-08-2023